PlusGuard 7 Series
The PlusGuard 7-10A is a multi-outlet design Voltage Protector rated at 10 Amps, prevents damages to electrical and electronic equipment from power fluctuation, especially over and under voltage levels of long duration.
The 6 sec / 180 sec delay reconnection provides protection against power-back surge commonly experienced after resumption of power in a power cut situation. Build-in MOV excess electricity for additional protection.
The PlusGuard 7-10A will automatically guard your equipment against brownouts or transient spikes induced by lighting or power line failure.
●  High voltage and low voltage cut-off protection
●  Delay reconnection selector 6 sec / 180 sec
●  Absorbs excess electricity through MOVs
●  Microprocessor controlled design
●  Grounded multi-outlet design
●  Surge suppression 900 Joules
●  Provide overload protection
●  Wall Mountable
MODEL PlusGuard 7-10A
Max. Current 10 Amps
Nominal Voltage 110-120Vac
Line Low Loss 90Vac
Line Low Comeback 95Vac
Line High Loss 140Vac
Line High Comeback 137Vac
Frequency 50Hz or 60Hz
Spike Protection 900 Joules
Type of Input Nema5-15P plug
Cable Length 1.2M (3.9ft)
Nominal Voltage 110-120Vac
Frequency 50Hz or 60Hz
Delay Timer 6 sec / 180 sec
Connector Nema5-15R socket*4pcs
Operating Temperature 0°C-40°C (32°F-104°F)
Humidity 0-95% (Non-condensing)
Acousitc Noise <40dB at 1M
Net Weight 240g
*Product specifications are subject to change without further notice. 

*The capacity of connected loading do not exceed the capacity of Voltage Protector.
PlusGuard 7 Series Manual
PlusGuard 7 Series Brochure